| Org. |
Ref. |
Standards |
Market |
| ASTM |
C1016-02 |
Standard Test Method for Determination of Water Absorption of Sealant Backing
(Joint Filler) Material |
General
|
| ASTM |
C1021-01 |
Standard Practice for Laboratories Engaged in Testing of Building Sealants |
General
|
| ASTM |
C1083-06 |
Standard Test Method for Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials |
General
|
| ASTM |
C1087-00 |
Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems |
General
|
| ASTM |
C1115-06 |
Standard Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories |
Construction Sealants
General
|
| ASTM |
C1127-01 |
Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with an Integral Wearing Surface |
General
|
| ASTM |
C1135-00(2005) |
Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants |
General
|
| ASTM |
C1166-06 |
Standard Test Method for Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories |
General
|
| ASTM |
C1183-04 |
Standard Test Method for Extrusion Rate of Elastomeric Sealants |
General
|
| ASTM |
C1184-05 |
Standard Specification for Structural Silicone Sealants |
General
|
| ASTM |
C1193 - 09 |
Standard Guide for Use of Joint Sealants |
General
|
| ASTM |
C1216-03 |
Standard Test Method for Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants |
General
|
| ASTM |
C1241-00(2005) |
Standard Test Method for Volume Shrinkage of Latex Sealants During Cure |
General
|
| ASTM |
C1246-00 |
Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure |
General
|
| ASTM |
C1247-98(2004) |
Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids |
General
|
| ASTM |
C1248-06 |
Standard Test Method for Staining of Porous Substrate by Joint Sealants |
General
|
| ASTM |
C1249 - 06a |
Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications |
General
|
| ASTM |
C1250-05 |
Standard Test Method for Nonvolatile Content of Cold Liquid-Applied Elastomeric Waterproofing Membranes |
General
|
| ASTM |
C1253-93(2005) |
Standard Test Method for Determining the Outgassing Potential of Sealant Backing |
General
|
| ASTM |
C1257-06 |
Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants |
General
|
| ASTM |
C1265-94(2005)e1 |
Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications |
General
|
| ASTM |
C1266-02 |
Standard Test Method for Flow Characteristics of Preformed Tape Sealants |
General
|
| ASTM |
C1281-03 |
Standard Specification for Preformed Tape Sealants for Glazing Applications |
General
|
| ASTM |
C1294-01 |
Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials |
General
|
| ASTM |
C1299-03 |
Standard Guide for Use in Selection of Liquid-Applied Sealants |
General
|
| ASTM |
C1305-06 |
Standard Test Method for Crack Bridging Ability of Liquid-Applied Waterproofing Membrane |
General
|
| ASTM |
C1306-05a |
Standard Test Method for Hydrostatic Pressure Resistance of a Liquid-Applied Waterproofing Membrane |
General
|
| ASTM |
C1311-02 |
Standard Specification for Solvent Release Sealants |
General
|
| ASTM |
C1330-02(2007) |
Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid Applied Sealants |
General
|
| ASTM |
C1367-01 |
Standard Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures |
General
|
| ASTM |
C1369-02 |
Standard Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units |
General
|
| ASTM |
C1382-05 |
Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints |
General
|
| ASTM |
C1392 |
Standard Guide for Evaluating Failure of Structural Sealant Glazing |
Construction Sealants
General
|
| ASTM |
C1392-00(2005) |
Standard Guide for Evaluating Failure of Structural Sealant Glazing |
General
|
| ASTM |
C1394-03(2008) |
Standard Guide for In-Situ Structural Silicone Glazing Evaluation |
General
|
| ASTM |
C1401 - 09a |
Standard Guide for Structural Sealant Glazing |
General
|
| ASTM |
C1442-06 |
Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus. |
General
|
| ASTM |
C1471-05 |
Standard Guide for the Use of High Solids Content Cold Liquid-Applied Elastomeric Waterproofing Membrane on Vertical Surfaces |
General
|
| ASTM |
C1481-00(2006) |
Standard Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems (EIFS) |
General
|
| ASTM |
C1487-02 (2007) |
Standard Guide for Remedying Structural Silicone Glazing |
General
|
| ASTM |
C1501-04 |
Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures |
General
|
| ASTM |
C1518-04 |
Standard Specification for Precured Elastomeric Silicone Joint Sealants |
General
|
| ASTM |
C1519-04 |
Standard Practice for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures |
General
|
| ASTM |
C1520-02 |
Standard Guide for Paintability of Latex Sealants |
General
|
| ASTM |
C1521-02a |
Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints |
General
|
| ASTM |
C1522-05 |
Standard Test Method for Extensibility After Heat Aging of Cold Liquid-Applied Elastomeric Waterproofing Membranes |
General
|
| ASTM |
C1523-04 |
Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants |
General
|
| ASTM |
C1536-03 |
Standard Test Method for Measuring the Yield for Aerosol Foam Sealants |
General
|
| ASTM |
C1564-04 |
Standard Guide for Use of Silicone Sealants for Protective Glazing Systems |
General
|
| ASTM |
C1589-05 |
Standard Practice for Outdoor Weathering of Construction Seals and Sealants |
General
|
| ASTM |
C1620-05 |
Standard Specification for Aerosol Polyurethane and Aerosol Latex Foam Sealants |
General
|
| ASTM |
C1635-06 |
Standard Test Method to Evaluate Adhesion/Cohesion Properties of a Sealant at Fixed Extension |
General
|
| ASTM |
C509-06 |
Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material |
General
|
| ASTM |
C510-05a |
Standard Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants |
General
|
| ASTM |
C542-05 |
Standard Specification for Lock-Strip Gaskets |
General
|
| ASTM |
C557-03e1 |
Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing |
Construction Adhesives
General
|
| ASTM |
C603-04 |
Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants |
General
|
| ASTM |
C639-01 |
Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants |
General
|
| ASTM |
C661-06 |
Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer |
General
|
| ASTM |
C679-03 |
Standard Test Method for Tack-Free Time of Elastomeric Sealants |
General
|
| ASTM |
C681-03 |
Standard Test Method for Volatility of Oil- and Resin-Based, Knife-Grade, Channel Glazing Compounds |
General
|
| ASTM |
C711-03 |
Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants |
General
|
| ASTM |
C712-03 |
Standard Test Method for Bubbling of One-Part, Elastomeric, Solvent-Release Type Sealants |
General
|
| ASTM |
C716-06 |
Standard Test Method for Bubbling of One-Part, Elastomeric, Solvent-Release Type Sealants |
General
|
| ASTM |
C717-06 |
Standard Terminology of Building Seals and Sealants |
General
|
| ASTM |
C719-93(2005) |
Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle) |
General
|
| ASTM |
C731-00(2006) |
Standard Test Method for Extrudability, After Package Aging, of Latex Sealants |
General
|
| ASTM |
C732-01 |
Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants |
General
|
| ASTM |
C734-01 |
Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering |
General
|
| ASTM |
C736-00(2006)e1 |
Standard Test Method for Extension-Recovery and Adhesion of Latex Sealants |
General
|
| ASTM |
C765-97(2001)e1 |
Standard Test Method for Low-Temperature Flexibility of Preformed Tape Sealants |
General
|
| ASTM |
C771-03 |
Standard Test Method for Weight Loss After Heat Aging of Preformed Sealing Tapes |
General
|
| ASTM |
C772-03(2009) |
Standard Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants |
General
|
| ASTM |
C782-03 |
Standard Test Method for Softness of Preformed Tape Sealants |
General
|
| ASTM |
C793-05 |
Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants |
General
|
| ASTM |
C794-01 |
Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants |
General
|
| ASTM |
C834-05 |
Standard Specification for Latex Sealants |
General
|
| ASTM |
C864-05 |
Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers |
General
|
| ASTM |
C879-03(2009) |
Standard Test Methods for Release Papers Used With Preformed Tape Sealants |
General
|
| ASTM |
C907-03(2008) |
Standard Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method |
General
|
| ASTM |
C908-00(2006) |
Standard Test Method for Yield Strength of Preformed Tape Sealants |
General
|
| ASTM |
C910-06 |
Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants |
General
|
| ASTM |
C919-02 |
Standard Practice for Use of Sealants in Acoustical Applications |
General
|
| ASTM |
C920-05 |
Standard Specification for Elastomeric Joint Sealants |
General
|
| ASTM |
C961-01 |
Standard Test Method for Lap Shear Strength of Sealants |
General
|
| ASTM |
C963-00 |
Standard Specification for Packaging, Identification, Shipment, and Storage of Lock-Strip Gaskets |
General
|
| ASTM |
C964-88(2002)e1 |
Standard Guide for Lock-Strip Gasket Glazing |
General
|
| ASTM |
C972-00(2006) |
Standard Test Method for Compression-Recovery of Tape Sealant |
General
|
| ASTM |
C981-05 |
Standard Guide for Design of Built-Up Bituminous Membrane Waterproofing Systems for Building Decks |
General
|
| ASTM |
D1002-05 |
Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading |
General
|
| ASTM |
D1062-02 |
Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds |
General
|
| ASTM |
D1084-97(2005) |
Standard Test Methods for Viscosity of Adhesives |
General
|
| ASTM |
D1101-97a(2006) |
Standard Test Methods for Integrity of Adhesive Joints in Structural Laminated Wood Products for Exterior Use |
Construction Adhesives
Woodworking
General
|
| ASTM |
D1144-99(2005) |
Standard Practice for Determining Strength Development of Adhesive Bonds |
Woodworking
General
|
| ASTM |
D1146-00 |
Standard Test Method for Blocking Point of Potentially Adhesive Layers |
General
|
| ASTM |
D1151-00 |
Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds |
General
|
| ASTM |
D1183-03 |
Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions |
General
|
| ASTM |
D1184-98(2004) |
Standard Test Method for Flexural Strength of Adhesive Bonded Laminated Assemblies |
General
|
| ASTM |
D1304-99(2005) |
Standard Test Methods for Adhesives Relative to Their Use as Electrical Insulation |
General
|
| ASTM |
D1337-04 |
Standard Practice for Storage Life of Adhesives by Viscosity and Bond Strength |
General
|
| ASTM |
D1338-99(2005) |
Standard Practice for Working Life of Liquid or Paste Adhesives by Consistency and Bond Strength |
General
|
| ASTM |
D1434 |
Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting. |
General
|
| ASTM |
D1488-00 |
Standard Practice for Working Life of Liquid or Paste Adhesives by Consistency and Bond Strength |
General
|
| ASTM |
D1489-97(2004) |
Standard Test Method for Nonvolatile Content of Aqueous Adhesives |
General
|
| ASTM |
D1490-01 |
Standard Test Method for Nonvolatile Content of Urea-Formaldehyde Resin Solutions |
Construction Adhesives
Woodworking
General
|
| ASTM |
D1579-01 |
Standard Test Method for Filler Content of Phenol, Resorcinol, and Melamine Adhesives |
General
|
| ASTM |
D1582-98(2004) |
Standard Test Method for Nonvolatile Content of Liquid Phenol, Resorcinol, and Melamine Adhesives |
General
|
| ASTM |
D1583-01 |
Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films |
General
|
| ASTM |
D1653 |
Standard Test Methods for Water Vapor Transmission of Organic Coating Films. |
General
|
| ASTM |
D1751 - 04(2008) |
Standard Specification for Preformed Expansion Joint Filler for Concrete Paving and Structural Construction |
Construction Adhesives
General
|
| ASTM |
D1752 - 04a(2008) |
Standard Specification for Preformed Sponge Rubber Cork and Recycled PVC Expansion Joint Fillers for Concrete Paving and Structural Construction |
Construction Adhesives
General
|
| ASTM |
D1779-98(2004) |
Standard Specification for Adhesive for Acoustical Materials |
Construction Adhesives
General
|
| ASTM |
D1780-05 |
Standard Practice for Conducting Creep Tests of Metal-to-Metal Adhesives |
General
|
| ASTM |
D1781-98(2004) |
Standard Test Method for Climbing Drum Peel for Adhesives |
General
|
| ASTM |
D1828-01e1 |
Standard Practice for Atmospheric Exposure of Adhesive-Bonded Joints and Structures |
General
|
| ASTM |
D1875-03 |
Standard Test Method for Density of Adhesives in Fluid Form |
General
|
| ASTM |
D1876-01 |
Standard Test Method for Peel Resistance of Adhesives (T-Peel Test) |
General
|
| ASTM |
D1879-06 |
Standard Practice for Exposure of Adhesive Specimens to Ionizing Radiation |
General
|
| ASTM |
D1994-95(2000) |
Standard Test Method for Determination of Acid Numbers of Hot-Melt Adhesives |
General
|
| ASTM |
D1995-92(2004) |
Standard Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives) |
Construction Adhesives
General
|
| ASTM |
D2093-03 |
Standard Practice for Preparation of Surfaces of Plastics Prior to Adhesive Bonding |
General
|
| ASTM |
D2094-00(2006) |
Standard Practice for Preparation of Bar and Rod Specimens for Adhesion Tests |
General
|
| ASTM |
D2095-96(2008) |
Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens |
General
|
| ASTM |
D2202-00(2006) |
Standard Test Method for Slump of Sealants |
General
|
| ASTM |
D2203-01(2007) |
Standard Test Method for Staining from Sealants |
General
|
| ASTM |
D2293-96(2002) |
Standard Test Method for Creep Properties of Adhesives in Shear by Compression Loading (Metal-to-Metal) |
General
|
| ASTM |
D2294-96(2008) |
Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal) |
General
|
| ASTM |
D2295-96(2008) |
Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal) |
General
|
| ASTM |
D2301 - 99(2004) |
Standard Specification for Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape |
General
|
| ASTM |
D2339-98(2004) |
Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading |
Construction Adhesives
Woodworking
General
|
| ASTM |
D2377-00(2008) |
Standard Test Method for Tack-Free Time of Caulking Compounds and Sealants |
General
|
| ASTM |
D2452-03(2009) |
Standard Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds |
General
|
| ASTM |
D2453 - 03(2009) |
Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds |
General
|
| ASTM |
D2484 - 06 |
Standard Specification for Polyester Film Pressure Sensitive electrical Insulating Tape |
Tapes
General
|
| ASTM |
D2556-93a(2005) |
Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties |
General
|
| ASTM |
D2557-98(2004) |
Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from -267.8 to -55°C (-450 to -67°F) |
General
|
| ASTM |
D2559-04 |
Standard Specification for Adhesives for Structural Laminated Wood Products for Use Under Exterior (Wet Use) Exposure Conditions |
Construction Adhesives
Transportation - Marine
Woodworking
General
|
| ASTM |
D2651 - 01(2008) |
Standard Guide for Preparation of Metal Surfaces for Adhesive Bonding |
General
|
| ASTM |
D2686 |
Standard Specification for Tetrafluoroethylene Backed Pressure Sensitive Electrical Tape |
Tapes
General
|
| ASTM |
D2739-97(2004) |
Standard Test Method for Volume Resistivity of Conductive Adhesives |
General
|
| ASTM |
D2739-97(2004) |
Standard Test Method for Volume Resistivity of Conductive Adhesives |
General
|
| ASTM |
D2851-98(2004) |
Standard Specification for Liquid Optical Adhesive |
General
|
| ASTM |
D2918-99(2005) |
Standard Test Method for Durability Assessment of Adhesive Joints Stressed in Peel |
General
|
| ASTM |
D2918-99(2005) |
Standard Test Method for Durability Assessment of Adhesive Joints Stressed in Peel |
General
|
| ASTM |
D2919-01e1 |
Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading |
General
|
| ASTM |
D2979-01 |
Standard Test Method for Pressure-Sensitive Tack of Adhesives Using an Inverted Probe Machine |
General
|
| ASTM |
D3078 |
Standard Test Method for Determination of Leaks in Flexible Packaging by Bubble Emission. |
General
|
| ASTM |
D3079 - 94(2009)e1 |
Standard Test Method for Water Vapor Transmission of Flexible Heat-Sealed Packages for Dry Products |
General
|
| ASTM |
D3111-99(2004)e1 |
Standard Test Method for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test Method |
General
|
| ASTM |
D3121-06 |
Standard Test Method for Tack of Pressure-Sensitive Adhesives by Rolling Ball |
General
|
| ASTM |
D3121 - 06 |
Standard Test Method for Tack of Pressure Sensitive Adhesive by Rolling Ball. |
General
|
| ASTM |
D3163 - 01(2008) |
Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading |
General
|
| ASTM |
D3164-03 |
Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading |
General
|
| ASTM |
D3164M-03 |
Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading |
General
|
| ASTM |
D3165-00 |
Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies |
General
|
| ASTM |
D3166-99(2005) |
Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal) |
General
|
| ASTM |
D3167-03a(2004) |
Standard Test Method for Floating Roller Peel Resistance of Adhesives |
General
|
| ASTM |
D3310 - 00(2006) |
Standard Test Method for Determining Corrosivity of Adhesive Materials |
General
|
| ASTM |
D3330 |
Standard Test Method for Peel Adhesion of Pressure Sensitive Tape. |
General
|
| ASTM |
D3433-99(2005) |
Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints |
General
|
| ASTM |
D3434 - 00(2006) |
Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives |
Construction Adhesives
Woodworking
General
|
| ASTM |
D3482-90(2000) |
Standard Practice for Determining Electrolytic Corrosion of Copper by Adhesives |
General
|
| ASTM |
D3498-03 |
Standard Specification for Adhesives for Field-Gluing Plywood to Lumber Framing for Floor Systems |
Construction Adhesives
General
|
| ASTM |
D3528-96(2002) |
Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading |
General
|
| ASTM |
D3535-00 |
Standard Test Method for Resistance to Creep Under Static Loading for Structural Wood Laminating Adhesives Used Under Exterior Exposure Conditions |
Construction Adhesives
Transportation - Marine
Woodworking
General
|
| ASTM |
D3632-98(2004) |
Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method |
Construction Adhesives
General
|
| ASTM |
D3658-01 |
Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints |
General
|
| ASTM |
D3762-03 |
Standard Test Method for Adhesive-Bonded Surface Durability of Aluminum (Wedge Test) |
General
|
| ASTM |
D3807-98(2004) |
Standard Test Method for Strength Properties of Adhesives in Cleavage Peel by Tension Loading (Engineering Plastics-to-Engineering Plastics) |
General
|
| ASTM |
D3808-01 |
Standard Test Method for Qualitative Determination of Adhesion of Adhesives to Substrates by Spot Adhesion |
General
|
| ASTM |
D3929-03 |
Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method |
General
|
| ASTM |
D3930-93a(2005) |
Standard Specification for Adhesives for Wood-Based Materials for Construction of Manufactured Homes |
Construction Adhesives
General
|
| ASTM |
D3931-93a(2005) |
Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading |
Construction Adhesives
General
|
| ASTM |
D3933-98(2004) |
Standard Guide for Preparation of Aluminum Surfaces for Structural Adhesives Bonding (Phosphoric Acid Anodizing) |
General
|
| ASTM |
D3983-98(2004) |
Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen |
Construction Adhesives
General
|
| ASTM |
D4027-98(2004) |
Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test |
Construction Adhesives
General
|
| ASTM |
D4300-01(2008) |
Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi |
General
|
| ASTM |
D4317-98(2004) |
Standard Test Method for Total Chlorine in Epoxy Resins and Compounds |
Construction Adhesives
Woodworking
General
|
| ASTM |
D4338-97(2004) |
Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend |
General
|
| ASTM |
D4338-97(2004) |
Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend |
General
|
| ASTM |
D4339 - 01(2007) |
Standard Test Method for Determination of the Odor of Adhesives |
General
|
| ASTM |
D4426-01 |
Standard Test Method for Determination of Percent Nonvolatile Content of Liquid Phenolic Resins Used for Wood Laminating |
Woodworking
General
|
| ASTM |
D4497-94(2004)e1 |
Standard Test Method for Determining the Open Time of Hot Melt Adhesives (Manual Method) |
General
|
| ASTM |
D4498-00 |
Standard Test Method for Heat-Fail Temperature in Shear of Hot Melt Adhesives |
General
|
| ASTM |
D4499-95(2000) |
Standard Test Method for Heat Stability of Hot-Melt Adhesives |
General
|
| ASTM |
D4501-01e1 |
Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method |
General
|
| ASTM |
D4502-92(2004) |
Standard Test Method for Heat and Moisture Resistance of Wood-Adhesive Joints |
Construction Adhesives
General
|
| ASTM |
D4562-01 |
Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen |
General
|
| ASTM |
D4680-98(2004) |
Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood) |
Construction Adhesives
Woodworking
General
|
| ASTM |
D4688-99(2005) |
Standard Test Method for Evaluating Structural Adhesives for Finger Jointing Lumber |
Construction Adhesives
Woodworking
General
|
| ASTM |
D4689-99(2005) |
Standard Specification for Adhesive, Casein-Type |
Construction Adhesives
Woodworking
General
|
| ASTM |
D4690-99(2005) |
Standard Specification for Urea-Formaldehyde Resin Adhesives |
Woodworking
General
|
| ASTM |
D4783-01 |
Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi |
General
|
| ASTM |
D4800-94(2005) |
Standard Guide for Classifying and Specifying Adhesives |
General
|
| ASTM |
D4896 - 01(2008)e1 |
Standard Guide for Use of Adhesive-Bonded Single Lap-Joint Specimen Test Results |
General
|
| ASTM |
D5040-90(2005) |
Standard Test Methods for Ash Content of Adhesives |
General
|
| ASTM |
D5041-98(2004) |
Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Joints |
General
|
| ASTM |
D5113-97(2005) |
Standard Test Method for Determining Adhesive Attack on Rigid Cellular Foam |
General
|
| ASTM |
D5215-93(2005) |
Standard Test Method for Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives |
Construction Adhesives
General
|
| ASTM |
D5266-99(2005) |
Standard Practice for Estimating the Percentage of Wood Failure in Adhesive Bonded Joints |
Woodworking
General
|
| ASTM |
D5267-97(2005) |
Standard Test Method for Determination of Extrudability of Cartridge Adhesives |
General
|
| ASTM |
D5363-03 |
Standard Specification for Anaerobic Single-Component Adhesives (AN) |
General
|
| ASTM |
D5572-95(2005) |
Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products |
Woodworking
General
|
| ASTM |
D5573-99(2005) |
Standard Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints |
General
|
| ASTM |
D5574-94(2005) |
Standard Test Methods for Establishing Allowable Mechanical Properties of Wood-Bonding Adhesives for Design of Structural Joints |
Construction Adhesives
General
|
| ASTM |
D5648-01 |
Standard Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity |
General
|
| ASTM |
D5649-01 |
Standard Test Method for Torque Strength of Adhesives Used on Threaded Fasteners |
General
|
| ASTM |
D5656-04e1 |
Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading |
General
|
| ASTM |
D5657-01 |
Standard Test Method for Fluid Tightness Ability of Adhesives Used on Threaded Fasteners |
General
|
| ASTM |
D5751-99(2005) |
Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products |
Woodworking
General
|
| ASTM |
D5824-98(2003) |
Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water |
Construction Adhesives
Woodworking
General
|
| ASTM |
D5868-01 |
Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding |
General
|
| ASTM |
D6004-04 |
Standard Test Method for Determining Adhesive Shear Strength of Carpet Adhesives |
Construction Adhesives
General
|
| ASTM |
D6005-03 |
Standard Test Method for Determining Slump Resistance of Carpet Adhesives |
Construction Adhesives
General
|
| ASTM |
D6105-04 |
Standard Test Method for Determining Slump Resistance of Carpet Adhesives |
General
|
| ASTM |
D6195-03 |
Standard Test Methods for Loop Tack |
General
|
| ASTM |
D6325-98(2004) |
Test Method for Determining Open Assembly Time of Carpet Mastic Adhesives |
Construction Adhesives
General
|
| ASTM |
D6396-99(2005) |
Test Method for Determining Open Assembly Time of Carpet Mastic Adhesives |
General
|
| ASTM |
D6411/D6411M-99(2005) |
Standard Specification for Slicone Rubber Room Temperature Vulcanizing Low Outgassing Materials |
General
|
| ASTM |
D6412/D6412M-99(2005) |
Standard Specification for Epoxy (Flexible) Adhesive for Bonding Metallic and Nonmetallic Materials |
General
|
| ASTM |
D6463/D6463M-06 |
Standard Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading |
General
|
| ASTM |
D6464-03ae1 |
Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing |
Construction Adhesives
General
|
| ASTM |
D6465-99(2005) |
Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants |
General
|
| ASTM |
D6694 |
Standard Specification for Liquid Applied Silicone Coating Used in Spray Polyurethane Foam Roofing |
Construction Adhesives
General
|
| ASTM |
D6862-04 |
Standard Test Method for 90 Degree Peel Resistance of Adhesives |
General
|
| ASTM |
D7149-05 |
Standard Practice for Determining the Freeze Thaw Stability of Adhesives |
General
|
| ASTM |
D7247 - 07ae1 |
Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures |
General
|
| ASTM |
D7447 - 08e1 |
Standard Practice for Symbolizing Adhesive Applications |
General
|
| ASTM |
D7532 - 09 |
Standard Practice for Determination of Re-tack Ability of Carpet Adhesives |
General
|
| ASTM |
D896-04 Standard |
Standard Practice for Resistance of Adhesive Bonds to Chemical Reagents |
General
|
| ASTM |
D897-01 |
Standard Test Method for Tensile Properties of Adhesive Bonds |
General
|
| ASTM |
D898-05 |
Standard Test Method for Applied Weight Per Unit Area of Dried Adhesive Solids |
General
|
| ASTM |
D899 - 00(2007) |
Standard Practice for Applied Weight Per Unit Area of Liquid Adhesive |
General
|
| ASTM |
D903-98(2004) |
Standard Test Method for Peel or Stripping Strength of Adhesive Bonds |
General
|
| ASTM |
D904-99(2005) |
Standard Practice for Exposure of Adhesive Specimens to Artificial Light |
General
|
| ASTM |
D905-03 |
Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading |
Construction Sealants
Woodworking
General
|
| ASTM |
D906-98(2004) |
Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading |
Construction Adhesives
Woodworking
General
|
| ASTM |
D907-05 |
Standard Terminology of Adhesives |
General
|
| ASTM |
D950-03 |
Standard Test Method for Impact Strength of Adhesive Bonds |
General
|
| ASTM |
F1306-90 (2008) |
Standard Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates |
General
|
| ASTM |
F1921 - 98(2004) |
Standard Test Method for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs |
General
|
| ASTM |
F1929 - 98(2004) |
Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration |
General
|
| ASTM |
F2029 - 08 |
Standard Practices for Making Heat Seals for Determination of Heat Sealability of Flexible Webs as Measured by Seal Strength. |
General
|
| ASTM |
F2054 - 07 |
Standard Test Method for Burst Testing of Flexible Package Seals Using Internal Air Pressurization within Restraining Plates. |
General
|
| ASTM |
F2217 - 02(2007) |
Standard Practice for Coating / Adhesive Weight Determination. |
General
|
| ASTM |
F88 / F88M - 09 |
Standard Test Method for Seal Strength of Flexible Barrier Materials. |
General
|
| ASTM |
WK1411 |
1. Scope
1.1 This test method covers the determination of the comparative impact strength of adhesive bonds in shear, when tested on standard specimens under specified conditions of preparation, conditioning, and testing.
1.2 The values stated in SI units are to be regarded as the standard. |
General
|
| ASTM: |
C836-05 |
Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course |
General
|
| ASTM: |
C898-01 |
Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Separate Wearing Course |
General
|
| ASTM: |
C957-05a |
Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface |
General
|
| ACI |
503.5R |
Guide for the Selection of Polymer Adhesives with Concrete |
Construction Adhesives
General
|
| ACI |
503.5R |
Guide for the Selection of Polymer Adhesives With Concrete |
Construction Adhesives
General
|
| ACI |
503.6R |
Guide for the Application of Epoxy and Latex Adhesive for Bonding and Hardened Concrete |
Construction Adhesives
General
|
| ACI |
503.6R |
|
Construction Adhesives
General
|
| ACI |
504R |
Guide to Joint Sealants for Concrete Structures |
Construction Adhesives
General
|
| AS |
1937.1 |
Methods of test for sealers and adhesives for automotive purposes - Determination of flow properties in absolute units (FOREIGN STANDARD). |
General
Construction Adhesives
General
|
| AS |
1937.1 |
Methods of test for sealers and adhesives for automotive purposes - Determination of flow properties in absolute units (FOREIGN STANDARD). |
General
Construction Adhesives
General
|
| AS |
1937.11 |
Methods of test for sealers and adhesives for automotive purposes - Determination of characteristics of medium to heavy bodied sealers resistant to embrittlement from ageing (FOREIGN STANDARD). |
General
Construction Adhesives
General
|
| AS |
1937.12 |
Methods of test for sealers and adhesives for automotive purposes - Determination of heat resistance of vinyl laminate (FOREIGN STANDARD). |
General
Construction Adhesives
General
|
| AS |
1937.2 |
Methods of test for sealers and adhesives for automotive purposes - Determination of initial bond strength of adhesives (FOREIGN STANDARD). |
General
Construction Adhesives
General
|
| AS |
1937.3 |
Methods of test for sealers and adhesives for automotive purposes - Determination of optimum open drying time of adhesives (FOREIGN STANDARD). |
General
Construction Adhesives
General
|
| AS |
1937.4 |
Methods of test for sealers and adhesives for automotive purposes - Determination of heat resistance of adhesive bonds (FOREIGN STANDARD). |
General
Construction Adhesives
General
|
| AS |
1937.5 |
Methods of test for sealers and adhesives for automotive purposes - Determination of staining of trim materials by adhesives (FOREIGN STANDARD). |
General
Construction Adhesives
General
|
| AS |
1937.6 |
Methods of test for sealers and adhesives for automotive purposes - Determination by pressure extrudiometer of the consistency of sealers (FOREIGN STANDARD). |
General
Construction Adhesives
General
|
| AS |
1937.7 |
Methods of test for sealers and adhesives for automotive purposes - Determination by pressure extrudiometer of the consistency of sealers after accelerated ageing (FOREIGN STANDARD). |
General
Construction Adhesives
General
|
| AS |
1937.8 |
Methods of test for sealers and adhesives for automotive purposes - Determination of staining of automotive paintwork by adhesives or sealers (FOREIGN STANDARD). |
General
Construction Adhesives
General
|
| AS |
1937.9 |
Methods of test for sealers and adhesives for automotive purposes - Determination of shear strength of metal-to-metal adhesive (FOREIGN STANDARD). |
General
Construction Adhesives
General
|
| ASTM |
0.4.07 |
Construction - Building Seals and Sealants; Fire Standards; Dimension Stone |
Construction Sealants
General
|
| ASTM |
C1085 |
ASTM C1085-91 Specification for Butyl Rubber Based Solvent-Release Sealants (Withdrawn 1997) |
General
|
| ASTM |
C1184 |
Standard Speciation for Structural Silicone Sealants |
Construction Sealants
General
|
| ASTM |
C1193 |
Standard Guide for Use of Joint Sealants |
General
|
| ASTM |
C1193 |
Guide for the Use of Latex Sealants |
General
|
| ASTM |
C1249 |
Standard Guide for Secondary Seal for Sealed Insulation Glass Units for Structural Sealant Glazing Applications |
Construction Sealants
General
|
| ASTM |
C1281 |
Standard Specification for Preformed Tape Sealants for Glazing Applications |
Tapes
General
|
| ASTM |
C1281 |
Standard Specification for Preformed Tape Sealants for Glazing Applications |
Tapes
General
|
| ASTM |
C1299 |
Standard Guide for Use in Selection of Liquid Applied Sealants |
General
|
| ASTM |
C1311 |
Standard Specification of Solvent Release Sealants |
General
|
| ASTM |
C1330 |
Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid Applied Sealants |
General
|
| ASTM |
C1369 |
Standard Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units |
Construction Sealants
General
|
| ASTM |
C1401 |
Standard Guide for Structural Sealant Glazing |
Construction Sealants
General
|
| ASTM |
C1481 |
Standard Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems |
General
|
| ASTM |
C1518 |
Standard Specification for Precured Elastomeric Silicone Joint Sealants |
Construction Sealants
General
|
| ASTM |
C509 |
Specification for Cellular Elastomeric Preformed Gasket and Sealing Material |
General
|
| ASTM |
C509-06 |
Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material |
General
|
| ASTM |
C797 |
ASTM C797-99 Terminology for Use of Oil- and Resin-Based Putty and Glazing Compounds (Withdrawn 2002) |
General
|
| ASTM |
C834 |
Standard Specification of Latex Sealants |
General
|
| ASTM |
C913 |
Standard Specification for Precast Concrete Water and Wastewater Structures |
Construction Adhesives
General
|
| ASTM |
C920 |
Standard Specification for Elastomeric Joint Sealants |
General
|
| ASTM |
D1003 |
Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications. |
General
|
| ASTM |
D1190 |
Concrete Joint Sealer, Hot-Poured Type |
Construction Sealants
General
|
| ASTM |
D2559 |
Standard Specification of Adhesives for Structural Laminated Wood Productions for Use Under Exterior (Wet-Use) Exposure Conditions |
Construction Adhesives
General
|
| ASTM |
D2628 |
Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavement |
Construction Adhesives
General
|
| ASTM |
D2684 |
Standard Test Method for Permeability of Thermoplastic Containers to Packaged Reagents or Proprietary Products. |
General
|
| ASTM |
D2979 |
Standard Test Method for Pressure Sensitive Tack of Adhesive Using an Inverted Probe Machine. |
General
|
| ASTM |
D3212 |
Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals |
General
|
| ASTM |
D3405 |
Joint Sealants, Hot Poured for Concrete and Asphalt Pavement |
Construction Sealants
General
|
| ASTM |
D3406 |
Specification of Joint Sealant Hot Applied Elastomeric Type for Portland Cement Concrete Pavements |
Construction Sealants
General
|
| ASTM |
D3498 |
Standard Specification for Adhesives for Field Gluing Plywood to Lumber Framing for Floor Systems |
Construction Adhesives
General
|
| ASTM |
D3654 |
Standard Test Methods for Shear Adhesion of Pressure Sensitive Tapes. |
General
|
| ASTM |
D3930 |
Adhesive for Wood Based Materials for Construction of Manufactured Homes |
Construction Adhesives
General
|
| ASTM |
D3930 |
Standard Specification for Adhesives for Wood Based Materials for Construction of Manufactured Homes |
Construction Adhesives
General
|
| ASTM |
D413-98 |
Standard Test Methods for Rubber Property – Adhesion to Flexible Substrates. |
Construction Adhesives
General
|
| ASTM |
D4690 |
Standard Specification for Urea Formaldehyde Resin Adhesive |
Construction Adhesives
General
|
| ASTM |
D5249 |
Standard Specification of Backer Material for Use with Cold and Hot Applied Joint Sealants in Portland Cement Concrete and Asphalt Joints |
Construction Adhesives
General
|
| ASTM |
D5249 |
Standard Specification of Backer Material for Use with Cold and hot Applied Joint Sealants in Portland Cement Concrete and Asphalt Joints |
Construction Sealants
General
|
| ASTM |
D5330 |
Standard Specification for Packaging, Filament Reinforced Pressure Sensitive Tape |
Tapes
General
|
| ASTM |
D5486 |
Standard Specification for Pressure Sensitive Tape for Packaging, Box Closure, and Sealing |
Tapes
General
|
| ASTM |
D5751 |
Standard Specification for Adhesive Used for Laminate Joints in Nonstructural Lumber Products |
Construction Adhesives
General
|
| ASTM |
D5893 |
Standard Specification for Cold Applied, Single Component, Chemical Curing, Silicone Joint Sealant for Portland Cement Concrete Pavements |
Construction Sealants
General
|
| ASTM |
D6083 |
Standard Specification for Liquid Applied Acrylic Coating Used in Roofing |
Construction Adhesives
General
|
| ASTM |
D6123 |
Standard Specification for Pressure Sensitive Tape for Light Duty Packaging and General Purpose Masking |
Tapes
General
|
| ASTM |
D6464 |
Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing |
Construction Adhesives
General
|
| ASTM |
D6465-99 |
Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants. |
General
|
| ASTM |
D6690 |
Standard Specification for Joint and Crack Sealants, Hot Applied for Concrete and Asphalt Pavements |
Construction Adhesives
General
|
| ASTM |
D6690 |
Standard Specification for Joint and Crack Sealant, Hot Applied for Concrete and Asphalt Pavements |
Construction Sealants
General
|
| ASTM |
D994 |
Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Concrete) |
Construction Adhesives
General
|
| ASTM |
E1514 |
Standard Specification for Structural Standing Seam Steel Roof Panel Systems |
Construction Adhesives
General
|
| ASTM |
E1612 |
Specification for Preformed Architectural Compression Sealant for Building and Parking Structures |
Construction Sealants
General
|
| ASTM |
E1637 |
Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems |
Construction Adhesives
General
|
| ASTM |
E2112 |
Standard Practice for Installation of Exterior Windows, Doors, and Skylights |
Construction Sealants
General
|
| ASTM |
E2190 |
Standard Specification for Insulation Glass Unit Performance and Evaluations |
Construction Sealants
General
|
| ASTM |
E2190 |
Standard Specification for Insulation Glass Unit Performance and Evaluations |
General
|
| ASTM |
E733 |
Specification of Sealed Insulating Glass Units |
General
|
| ASTM |
E774 |
Standard Specification for the Classification of the Durability of Sealed Insulating Glass Units |
General
|
| ASTM |
E96 |
Standard Tests Methods for Water Vapor Transmission of Materials. |
General
|
| ASTM |
F1868 |
Standard Test Method for Determining Integrity of Seals for Medical Packaging by Visual Inspection. |
General
|
| ASTM |
F1927 |
Standard Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled RH Through Barrier Materials Using a Coulometric Detector. |
General
|
| ASTM |
F1980 |
Standard Guide for Accelerated Aging of Sterile Medical Device Packages. |
General
|
| ASTM |
F2095 |
Standard Test Methods for Pressure Decay Leak Test for Nonporous Flexible Packages With and Without Restraining Plates. |
General
|
| ASTM |
F2096 |
Standard Test Method for Detecting Gross Leaks in Porous Medical Packaging by Internal Pressurization (Bubble Test). |
General
|
| ASTM |
F2228 |
Standard Test Method for Non-Destructive Detection of Leaks in Medical Packaging Which Incorporates Porous Barrier Material By CO2 Trace Gas Method. |
General
|
| ASTM |
F2448-05 |
Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications |
General
|
| ASTM |
F2524-06 |
Standard Practice for Determination of Volatile Content for Formed-in-Place Gaskets (FIPG) Silicone Adhesives and Sealants for Transportation Applications |
General
|
| BIS |
3046 |
Specification for Adhesive for Hanging Flexible Wall Coverings |
Construction Adhesives
General
|
| BIS |
5442 |
Classification of Adhesives for Construction |
Construction Adhesives
General
|
| BS |
3046 |
Specification for Adhesive for Hanging Flexible Wall Coverings |
Construction Adhesives
General
|
| BS |
5442 |
Classification of Adhesive for Construction |
Construction Adhesives
General
|
| BS |
5442 |
Classification of Adhesive for Construction |
Construction Sealants
General
|
| BS |
6213 |
Guide to Selection of Construction Sealants |
Construction Sealants
General
|
| BS |
6213 |
Guide to Selection of Constructional Sealants |
Construction Sealants
General
|
| BS |
8000 P16 |
Workmanship on Building Sites - Part 16, Code of Practice for Sealing Joints in Buildings Using Sealants |
Construction Sealants
General
|
| BS |
8000 P16 |
Workmanship on Building Sites - Part 16. Code of Practice for Sealing joints in Buildings Using Sealants |
Construction Sealants
General
|
| BS |
DD 121 |
Classification System for Sealants for Building and Construction |
Construction Sealants
General
|
| BS |
EN1270 |
Determination of Blocking Behavior of Potentially Adhesive Layers. |
General
|
| BS |
EN12703 |
Determination of Low Temperature Flexibility or Cold Crack Temperature. |
General
|
| BS |
EN12704 |
Determination of Foam Formation for Aqueous Adhesives. |
General
|
| BS |
EN12960 |
Determination of Shear Resistance. |
General
|
| BS |
EN1719 |
Determination of Loop Tack. |
General
|
| BS |
EN1720 |
Determination of Dispersability. |
General
|
| BS |
EN1721 |
Determination of Rolling Ball Tack. |
General
|
| BS |
EN1895 |
T-Peel Test for a Flexible-to-Flexible Assembly. |
General
|
| CNS |
A2151 |
Epoxy Injection Adhesive for repairing in Buildings |
Construction Adhesives
General
|
| DIN |
16864 |
Dispersion, Solvent Borne and Multi-Part Adhesive for Elastomer Floor, Wall, and Ceiling Coverings |
Construction Adhesives
General
|
| DIN |
16864 |
Dispersion, Solvent Borne and Multi Part Adhesives for Elastomer Floor, Wall, and Ceiling Coverings |
Construction Adhesives
General
|
| DIN |
281 |
Adhesives for Parquet Flooring - Requirements, Testing and Application |
General
|
| DIN |
281 |
Adhesives for Parquet Flooring - Requirements Testing and Application |
Construction Adhesives
General
|
| DIN |
55477 |
Bond Strength. |
General
|
| DIN |
EN 3094 |
Aerospace series - Sealants - Test method; determination of application time (FOREIGN STANDARD). |
General
|
| DIN |
EN 3095 |
Aerospace series - Sealants - Test method DIN Determination of extended assembly time (FOREIGN STANDARD). |
General
|
| DIN |
EN 3096 |
Aerospace series - Sealants - Test method; determination of tack-free time (FOREIGN STANDARD). |
General
|
| DIN |
EN 3101 |
Aerospace series - Non-metallic materials - Sealants; test methods; determination of resistance to thermal rupture (FOREIGN STANDARD). |
General
|
| DIN |
EN 3102 |
Aerospace series - Sealants - Test methods; Determination of low-temperature flexibility (FOREIGN STANDARD) |
General
|
| DIN |
EN 3624 |
Aerospace series - Polysulphide sealants, two component - Technical specification (FOREIGN STANDARD). |
General
|
| EEC |
77/728 |
Classification, Packaging, and Labeling of Paints, Varnishes, Printing Inks, Adhesives and Similar Products. |
General
|
| EN |
12436 |
Adhesives for load bearing timber structures - Casein adhesives - Classification and performance requirements |
Construction Adhesives
General
|
| EN |
12765 |
Classification of thermosetting wood adhesive for non-structural applications |
Construction Adhesives
General
|
| EN |
204 |
Classification of thermoplastic wood adhesive for non-structural applications |
Construction Adhesives
General
|
| EN |
301 |
Adhesives, phenolic and aminoplastic, for load bearing timber structures - Classification and performance requirements |
Construction Adhesives
General
|
| FDA |
G95-1 |
Biocompatibility Testing |
General
|
| ISO |
10993EN 10993 |
Biocompatibility Testing for Adhesive in Contact with Human Skin |
General
|
| ISO |
11600 |
Building Construction - Jointing Products - Classification and Requirements for Sealants |
Construction Sealants
General
|
| ISO |
527 |
Tensile Test, Seam Strength. |
General
|
| ISO |
534 |
Adhesive Thickness Test. |
General
|
| JIS |
A 5538 |
Adhesive for Wall and Ceiling Boards |
Construction Adhesives
General
|
| JIS |
A5538 |
Adhesives for Wall and Ceiling Boards |
Construction Adhesives
General
|
| JIS |
A 5539 |
Adhesives for Ceiling Boards |
Construction Adhesives
General
|
| JIS |
A 5539 |
Adhesives for Ceiling Boards |
Construction Adhesives
General
|
| JIS |
A6024 |
Epoxy Injection Adhesive for repairing in Buildings |
Construction Adhesives
General
|
| JIS |
A6024 |
Epoxy Injection Adhesives for Repairing in Buildings |
Construction Adhesives
Repairs
General
|
| JIS |
A6922 |
Adhesives for Wall Paper and Wall Coverings for Decorative Finish |
Construction Adhesives
General
|
| PDA |
Tech. Rpt. 27 |
Pharmaceutical Package Integrity. |
General
|
| SAA |
AS222 |
Packaging Materials and Accessories – Adhesive for Unit Loads (Palletizing Adhesives). |
General
|
| SAA |
AS2400.12 |
Packaging – Adhesive Closing and Sealing Tapes. |
General
|
| SAA |
AS2400.14 |
Packaging – Adhesives. |
General
|
| SAE |
AMS 1320 |
Decal Adhesive Remover. |
Construction Adhesives
General
|
| SAE |
AMS 3106 |
Primer, Adhesive, Corrosion Inhibiting, -67 to 200°F |
Construction Adhesives
General
|
| SAE |
AMS 3107 |
Primer, Adhesive, Corrosion-Inhibiting, for High Durability Structural Adhesive Bonding. |
Construction Adhesives
General
|
| SAE |
AMS 3374 |
Sealing Compound, One Part Silicone, Aircraft Firewall. |
General
|
| SAE |
AMS 3375 |
Adhesive/Sealant, Fluorosilicone Aromatic Fuel Resistant, One Part Room Temperature Vulcanizing. |
General
Construction Adhesives
General
|
| SAE |
AMS 3376 |
Sealing Compound, Noncuring, Groove Injection, Temperature and Fuel Resistant. |
General
|
| SAE |
AMS 3491 |
Surface Treatment of Polytetrafluoroethylene. |
Construction Adhesives
General
|
| SAE |
AMS 3681 |
Adhesive, Electrically Conductive, Silver Organic Base. |
Construction Adhesives
General
|
| SAE |
AMS 3685 |
Adhesive, Synthetic Rubber, Buna N Type. |
Construction Adhesives
General
|
| SAE |
AMS 3686 |
Adhesive Polyimide Resin, Film and Paste, High Temperature Resistant, 315°C or 600°F. |
Construction Adhesives
General
|
| SAE |
AMS 3687 |
Adhesive Film, Humidity Resistant, for Sandwich Panels. |
Construction Adhesives
General
|
| SAE |
AMS 3688 |
Adhesive, Foaming, Honeycomb Core Splice, Structural, -55 to 82°C. |
Construction Adhesives
General
|
| SAE |
AMS 3689 |
Adhesive, Foaming, Honeycomb Core Splice, Structural, -55 to 177°C. |
Construction Adhesives
General
|
| SAE |
AMS 3690 |
Adhesive Compound, Epoxy, Room Temperature Curing. |
Construction Adhesives
General
|
| SAE |
AMS 3691 |
Adhesive Compound Epoxy, Medium Temperature Application. |
Construction Adhesives
General
|
| SAE |
AMS 3692 |
Adhesive Compound, Epoxy, High Temperature Application. |
Construction Adhesives
General
|
| SAE |
AMS 3693 |
Adhesive, Modified Epoxy, Moderate Heat Resistant, 120°C Curing, Film Type. |
Construction Adhesives
General
|
| SAE |
AMS 3695 |
Adhesive Film, Epoxy Base for High Durability Structural Adhesive Bonding. |
Construction Adhesives
General
|
| SAE |
AMS 3696 |
Aerodynamic Fairing Compound, -55 to 85°C. |
General
|
| SAE |
AMS 3697 |
Aerodynamic Fairing Compound, -55 to 150°C |
General
|
| SAE |
AMS 3698 |
Adhesive Film, Hot Melt, Addition Type Polyimide, for Foam Sandwich Structure, -67 to 450°F. |
General
|
| SAE |
APR 1575 |
Surface Preparation and Priming of Aluminum Alloy Parts for High Durability Structural Adhesive Bonding, Hand Applied Phosphoric Acid Anodizing. |
Construction Adhesives
General
|
| SAE |
ARP 1524 |
Surface Preparation and Priming of Aluminum Alloy Parts for High Durability Structural Adhesive Bonding, Phosphoric Acid Anodizing. |
Construction Adhesives
General
|
| SAE |
ARP 1843 |
Surface Preparation for Structural Adhesive Bonding Titanium Alloy Parts. |
Construction Adhesives
General
|
| SAE |
ARP 4069 |
Aerospace Recommended Practice for Sealing Integral Fuel Tanks. |
General
|
| SAE |
J 1523 |
Recommended Practice for Metal to Metal Overlap Shear Strength Test for Automotive Type Adhesives. |
Construction Adhesives
General
|
| SAE |
J1524 |
Method of Viscosity Test for Automotive Type Adhesive, Sealers, and Deadeners. |
General
Construction Adhesives
General
|
| SAE |
J 1525 |
Recommended Practice for Lap Shear for Automotive Type Adhesives for Fiber Reinforced (FRP) Bonding. |
Construction Adhesives
General
|
| SAE |
J1969 |
Electrocoat Compatibilities of Automotive Sealers. |
General
|
| SAE |
J2025 |
Method for Evaluation the Flow Properties of Pumpable Sealers. |
General
|
| SAE |
J2375 |
The Selection of Adhesive for the Attachment of Exterior Aftermarket Accessories. |
Construction Adhesives
General
|
| SAE |
J243 |
Methods of Test for Automotive Type Sealers, Adhesives, and Deadeners. |
General
Construction Adhesives
General
|
| SAE |
J2621 |
Qualifying Aftermarket Two-Component Structural Foams. |
Construction Adhesives
General
|
| SAE AMS |
3704 |
Adhesive, Contact Chloroprene, Resin Modified. |
Construction Adhesives
General
|
| UL |
181A |
Pressure Sensitive Tape for Use with Rigid Fiberglass Air Ducts |
Tapes
General
|
| Source: www.astm.org |
