| Org. |
Ref. |
Standards |
Market |
| ACI |
503.5R |
Guide for the Selection of Polymer Adhesives with Concrete |
Construction Adhesives
General
|
| ACI |
503.5R |
Guide for the Selection of Polymer Adhesives With Concrete |
Construction Adhesives
General
|
| ACI |
503.6R |
Guide for the Application of Epoxy and Latex Adhesive for Bonding and Hardened Concrete |
Construction Adhesives
General
|
| ACI |
503.6R |
|
Construction Adhesives
General
|
| ACI |
504R |
Guide to Joint Sealants for Concrete Structures |
Construction Adhesives
General
|
| AS |
1937.1 |
Methods of test for sealers and adhesives for automotive purposes - Determination of flow properties in absolute units (FOREIGN STANDARD). |
General
Construction Adhesives
General
|
| AS |
1937.1 |
Methods of test for sealers and adhesives for automotive purposes - Determination of flow properties in absolute units (FOREIGN STANDARD). |
General
Construction Adhesives
General
|
| AS |
1937.11 |
Methods of test for sealers and adhesives for automotive purposes - Determination of characteristics of medium to heavy bodied sealers resistant to embrittlement from ageing (FOREIGN STANDARD). |
General
Construction Adhesives
General
|
| AS |
1937.12 |
Methods of test for sealers and adhesives for automotive purposes - Determination of heat resistance of vinyl laminate (FOREIGN STANDARD). |
General
Construction Adhesives
General
|
| AS |
1937.2 |
Methods of test for sealers and adhesives for automotive purposes - Determination of initial bond strength of adhesives (FOREIGN STANDARD). |
General
Construction Adhesives
General
|
| AS |
1937.3 |
Methods of test for sealers and adhesives for automotive purposes - Determination of optimum open drying time of adhesives (FOREIGN STANDARD). |
General
Construction Adhesives
General
|
| AS |
1937.4 |
Methods of test for sealers and adhesives for automotive purposes - Determination of heat resistance of adhesive bonds (FOREIGN STANDARD). |
General
Construction Adhesives
General
|
| AS |
1937.5 |
Methods of test for sealers and adhesives for automotive purposes - Determination of staining of trim materials by adhesives (FOREIGN STANDARD). |
General
Construction Adhesives
General
|
| AS |
1937.6 |
Methods of test for sealers and adhesives for automotive purposes - Determination by pressure extrudiometer of the consistency of sealers (FOREIGN STANDARD). |
General
Construction Adhesives
General
|
| AS |
1937.7 |
Methods of test for sealers and adhesives for automotive purposes - Determination by pressure extrudiometer of the consistency of sealers after accelerated ageing (FOREIGN STANDARD). |
General
Construction Adhesives
General
|
| AS |
1937.8 |
Methods of test for sealers and adhesives for automotive purposes - Determination of staining of automotive paintwork by adhesives or sealers (FOREIGN STANDARD). |
General
Construction Adhesives
General
|
| AS |
1937.9 |
Methods of test for sealers and adhesives for automotive purposes - Determination of shear strength of metal-to-metal adhesive (FOREIGN STANDARD). |
General
Construction Adhesives
General
|
| ASTM |
0.4.07 |
Construction - Building Seals and Sealants; Fire Standards; Dimension Stone |
Construction Sealants
General
|
| ASTM |
C1115-06 |
Standard Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories |
Construction Sealants
General
|
| ASTM |
C1184 |
Standard Speciation for Structural Silicone Sealants |
Construction Sealants
General
|
| ASTM |
C1249 |
Standard Guide for Secondary Seal for Sealed Insulation Glass Units for Structural Sealant Glazing Applications |
Construction Sealants
General
|
| ASTM |
C1369 |
Standard Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units |
Construction Sealants
General
|
| ASTM |
C1392 |
Standard Guide for Evaluating Failure of Structural Sealant Glazing |
Construction Sealants
General
|
| ASTM |
C1401 |
Standard Guide for Structural Sealant Glazing |
Construction Sealants
General
|
| ASTM |
C1401 - 09a |
Standard Guide for Structural Sealant Glazing |
General
|
| ASTM |
C1518 |
Standard Specification for Precured Elastomeric Silicone Joint Sealants |
Construction Sealants
General
|
| ASTM |
C913 |
Standard Specification for Precast Concrete Water and Wastewater Structures |
Construction Adhesives
General
|
| ASTM |
D1190 |
Concrete Joint Sealer, Hot-Poured Type |
Construction Sealants
General
|
| ASTM |
D1751 - 04(2008) |
Standard Specification for Preformed Expansion Joint Filler for Concrete Paving and Structural Construction |
Construction Adhesives
General
|
| ASTM |
D1752 - 04a(2008) |
Standard Specification for Preformed Sponge Rubber Cork and Recycled PVC Expansion Joint Fillers for Concrete Paving and Structural Construction |
Construction Adhesives
General
|
| ASTM |
D2628 |
Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavement |
Construction Adhesives
General
|
| ASTM |
D3405 |
Joint Sealants, Hot Poured for Concrete and Asphalt Pavement |
Construction Sealants
General
|
| ASTM |
D3406 |
Specification of Joint Sealant Hot Applied Elastomeric Type for Portland Cement Concrete Pavements |
Construction Sealants
General
|
| ASTM |
D3498-03 |
Standard Specification for Adhesives for Field-Gluing Plywood to Lumber Framing for Floor Systems |
Construction Adhesives
General
|
| ASTM |
D3632-98(2004) |
Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method |
Construction Adhesives
General
|
| ASTM |
D3930-93a(2005) |
Standard Specification for Adhesives for Wood-Based Materials for Construction of Manufactured Homes |
Construction Adhesives
General
|
| ASTM |
D3931-93a(2005) |
Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading |
Construction Adhesives
General
|
| ASTM |
D3983-98(2004) |
Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen |
Construction Adhesives
General
|
| ASTM |
D4027-98(2004) |
Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test |
Construction Adhesives
General
|
| ASTM |
D413-98 |
Standard Test Methods for Rubber Property – Adhesion to Flexible Substrates. |
Construction Adhesives
General
|
| ASTM |
D4502-92(2004) |
Standard Test Method for Heat and Moisture Resistance of Wood-Adhesive Joints |
Construction Adhesives
General
|
| ASTM |
D5215-93(2005) |
Standard Test Method for Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives |
Construction Adhesives
General
|
| ASTM |
D5249 |
Standard Specification of Backer Material for Use with Cold and Hot Applied Joint Sealants in Portland Cement Concrete and Asphalt Joints |
Construction Adhesives
General
|
| ASTM |
D5249 |
Standard Specification of Backer Material for Use with Cold and hot Applied Joint Sealants in Portland Cement Concrete and Asphalt Joints |
Construction Sealants
General
|
| ASTM |
D5574-94(2005) |
Standard Test Methods for Establishing Allowable Mechanical Properties of Wood-Bonding Adhesives for Design of Structural Joints |
Construction Adhesives
General
|
| ASTM |
D5824-98(2003) |
Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water |
Construction Adhesives
Woodworking
General
|
| ASTM |
D5893 |
Standard Specification for Cold Applied, Single Component, Chemical Curing, Silicone Joint Sealant for Portland Cement Concrete Pavements |
Construction Sealants
General
|
| ASTM |
D6004-04 |
Standard Test Method for Determining Adhesive Shear Strength of Carpet Adhesives |
Construction Adhesives
General
|
| ASTM |
D6005-03 |
Standard Test Method for Determining Slump Resistance of Carpet Adhesives |
Construction Adhesives
General
|
| ASTM |
D6325-98(2004) |
Test Method for Determining Open Assembly Time of Carpet Mastic Adhesives |
Construction Adhesives
General
|
| ASTM |
D6464-03ae1 |
Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing |
Construction Adhesives
General
|
| ASTM |
D6690 |
Standard Specification for Joint and Crack Sealants, Hot Applied for Concrete and Asphalt Pavements |
Construction Adhesives
General
|
| ASTM |
D6690 |
Standard Specification for Joint and Crack Sealant, Hot Applied for Concrete and Asphalt Pavements |
Construction Sealants
General
|
| ASTM |
D994 |
Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Concrete) |
Construction Adhesives
General
|
| ASTM |
E2190 |
Standard Specification for Insulation Glass Unit Performance and Evaluations |
Construction Sealants
General
|
| BIS |
5442 |
Classification of Adhesives for Construction |
Construction Adhesives
General
|
| BS |
5442 |
Classification of Adhesive for Construction |
Construction Adhesives
General
|
| BS |
5442 |
Classification of Adhesive for Construction |
Construction Sealants
General
|
| BS |
6213 |
Guide to Selection of Construction Sealants |
Construction Sealants
General
|
| BS |
6213 |
Guide to Selection of Constructional Sealants |
Construction Sealants
General
|
| BS |
8000 P16 |
Workmanship on Building Sites - Part 16, Code of Practice for Sealing Joints in Buildings Using Sealants |
Construction Sealants
General
|
| BS |
8000 P16 |
Workmanship on Building Sites - Part 16. Code of Practice for Sealing joints in Buildings Using Sealants |
Construction Sealants
General
|
| BS |
DD 121 |
Classification System for Sealants for Building and Construction |
Construction Sealants
General
|
| CNS |
A2151 |
Epoxy Injection Adhesive for repairing in Buildings |
Construction Adhesives
General
|
| ISO |
11600 |
Building Construction - Jointing Products - Classification and Requirements for Sealants |
Construction Sealants
General
|
| JIS |
A6024 |
Epoxy Injection Adhesive for repairing in Buildings |
Construction Adhesives
General
|
| JIS |
A6024 |
Epoxy Injection Adhesives for Repairing in Buildings |
Construction Adhesives
Repairs
General
|
| SAE |
AMS 1320 |
Decal Adhesive Remover. |
Construction Adhesives
General
|
| SAE |
AMS 3106 |
Primer, Adhesive, Corrosion Inhibiting, -67 to 200°F |
Construction Adhesives
General
|
| SAE |
AMS 3107 |
Primer, Adhesive, Corrosion-Inhibiting, for High Durability Structural Adhesive Bonding. |
Construction Adhesives
General
|
| SAE |
AMS 3375 |
Adhesive/Sealant, Fluorosilicone Aromatic Fuel Resistant, One Part Room Temperature Vulcanizing. |
General
Construction Adhesives
General
|
| SAE |
AMS 3491 |
Surface Treatment of Polytetrafluoroethylene. |
Construction Adhesives
General
|
| SAE |
AMS 3681 |
Adhesive, Electrically Conductive, Silver Organic Base. |
Construction Adhesives
General
|
| SAE |
AMS 3685 |
Adhesive, Synthetic Rubber, Buna N Type. |
Construction Adhesives
General
|
| SAE |
AMS 3686 |
Adhesive Polyimide Resin, Film and Paste, High Temperature Resistant, 315°C or 600°F. |
Construction Adhesives
General
|
| SAE |
AMS 3687 |
Adhesive Film, Humidity Resistant, for Sandwich Panels. |
Construction Adhesives
General
|
| SAE |
AMS 3688 |
Adhesive, Foaming, Honeycomb Core Splice, Structural, -55 to 82°C. |
Construction Adhesives
General
|
| SAE |
AMS 3689 |
Adhesive, Foaming, Honeycomb Core Splice, Structural, -55 to 177°C. |
Construction Adhesives
General
|
| SAE |
AMS 3690 |
Adhesive Compound, Epoxy, Room Temperature Curing. |
Construction Adhesives
General
|
| SAE |
AMS 3691 |
Adhesive Compound Epoxy, Medium Temperature Application. |
Construction Adhesives
General
|
| SAE |
AMS 3692 |
Adhesive Compound, Epoxy, High Temperature Application. |
Construction Adhesives
General
|
| SAE |
AMS 3693 |
Adhesive, Modified Epoxy, Moderate Heat Resistant, 120°C Curing, Film Type. |
Construction Adhesives
General
|
| SAE |
AMS 3695 |
Adhesive Film, Epoxy Base for High Durability Structural Adhesive Bonding. |
Construction Adhesives
General
|
| SAE |
APR 1575 |
Surface Preparation and Priming of Aluminum Alloy Parts for High Durability Structural Adhesive Bonding, Hand Applied Phosphoric Acid Anodizing. |
Construction Adhesives
General
|
| SAE |
ARP 1524 |
Surface Preparation and Priming of Aluminum Alloy Parts for High Durability Structural Adhesive Bonding, Phosphoric Acid Anodizing. |
Construction Adhesives
General
|
| SAE |
ARP 1843 |
Surface Preparation for Structural Adhesive Bonding Titanium Alloy Parts. |
Construction Adhesives
General
|
| SAE |
J 1523 |
Recommended Practice for Metal to Metal Overlap Shear Strength Test for Automotive Type Adhesives. |
Construction Adhesives
General
|
| SAE |
J1524 |
Method of Viscosity Test for Automotive Type Adhesive, Sealers, and Deadeners. |
General
Construction Adhesives
General
|
| SAE |
J 1525 |
Recommended Practice for Lap Shear for Automotive Type Adhesives for Fiber Reinforced (FRP) Bonding. |
Construction Adhesives
General
|
| SAE |
J2375 |
The Selection of Adhesive for the Attachment of Exterior Aftermarket Accessories. |
Construction Adhesives
General
|
| SAE |
J243 |
Methods of Test for Automotive Type Sealers, Adhesives, and Deadeners. |
General
Construction Adhesives
General
|
| SAE |
J2621 |
Qualifying Aftermarket Two-Component Structural Foams. |
Construction Adhesives
General
|
| SAE AMS |
3704 |
Adhesive, Contact Chloroprene, Resin Modified. |
Construction Adhesives
General
|
| Source: www.astm.org |
